毕业设计论文 外文文献翻译 中英文对照 现有测绘成果转换到中国2000大地坐标系.doc

《毕业设计论文 外文文献翻译 中英文对照 现有测绘成果转换到中国2000大地坐标系.doc》由会员分享，可在线阅读，更多相关《毕业设计论文 外文文献翻译 中英文对照 现有测绘成果转换到中国2000大地坐标系.doc（33页珍藏版）》请在沃文网上搜索。

1、 英文原文Conversion of existing mapping results to the China Geodetic Coordinate System 2000China is a vast area of the country, due to historical reasons, Chinas adoption of the Beijing 54 coordinate system, such as Xian 80 coordinate system coordinates. With the mapping technology known as 2000, China

2、 established a national geodetic coordinate system of the earth coordinate system. This will be the extent possible, on Chinas achievements have been converted to the new mapping coordinates a variety of theoretical methods to be learning from industry peers.1.Definition of the China Geodetic Coordi

3、nate System 20001. National Geodetic coordinate system is defined to include the origin of coordinates, three axes of direction, scale, and the earth ellipsoid four basic parameters of the definition. China Geodetic Coordinate System origin to include the oceans and atmosphere whole Earths center of

4、 mass; China Geodetic Coordinate System Z axis pointing to the original Epoch 2000.0 of the Earths direction, the epoch of the point by the International Bureau of time epoch 1984.0 set the initial point for the projections, the time evolution of orientation relative to the crust does not guarantee

5、the global residual rotation, X-axis pointing to the original point of reference Greenwich meridian and the Earth equatorial plane (epoch 2000.0) of the intersection, Y-axis and Z axis, X axis to the right hand orthogonal coordinate system. With general relativity in the sense of scale. China Geodet

6、ic Coordinate System used in the earth ellipsoid parameters values are:Long axle a6378137mFlat rate f=1/298.257222101Gravitational constant GM3.9860044181014m3s-2Angular velocity 7.292l1510-5rad s-1Other parameters as follows:Short radiusb(m)6356752.31414Polar radius of curvaturec (m)6399593.62586Th

7、e first eccentricity e0.0818191910428Squared of first eccentricity e20.00669438002290Second Eccentricity 0.0820944381519Squared of Second Eccentricity 20.006739496775481/4The length of the meridian circle Q(m)10001965.7293The average radius of ellipsoid R1(m)6371008.77138The same surface area of the

8、 sphere radius R2(m)6371007.18092The same volume of radiusR3(m)6371000.78997Ellipsoid in the proper position U0(m2s-2)62636851.7149Dynamic shape factor J20.001082629832258Spherical harmonic coefficients J4-0.00000237091126Spherical harmonic coefficients J60.00000000608347Spherical harmonic coefficie

9、nts J8-0.000000000014270.00344978650678The Equators value of normal gravity e9.7803253361Polarized normal gravity valuep9.8321849379Mean normal gravity 9.7976432224Latitude45 degrees of the normal gravity value459.80619776952. The method of Point and coordinates transformation(1) Model selectionThe

10、scope of national and provincial choose two-dimensional coordinate conversion seven parameter transformation model; provincial level below the three-dimensional coordinate conversion option or four-parameter model for planar four-parameter model. For the relatively independent plane coordinate syste

11、m and the China Geodetic Coordinate System links four parameters model can be used flat or polynomial regression model. Coordinate transformation model detailed in Part VI of this guide.(2) Coincidence point selectionCoincidence coordinates can be used in the two coordinates are the results of the p

12、oint coordinates. But in the end overlap point needed to determine the conversion parameters according to the calculated coincidence coordinate residuals, according to the size of the residuals to determine if the residual error is greater than 3 times removed in recalculate the coordinate conversio

13、n parameters until satisfied precision so far; used to calculate the number of transformation parameters and conversion Coincidence size of the region, but not less than five.(3) Calculation of model parametersCoincidence identified with the coordinates of the coordinate conversion model model param

14、eters using least squares method. (4)Accuracy assessment and validation.Coordinate transformation with the above model must meet the corresponding precision indicators, specific indicators and assessment of accuracy assessment methods, see the annex to relevant content. Select some coincidence as an

15、 external check point, is not involved in conversion parameter calculation, calculating the transformation parameters using the conversion point coordinates are compared with known coordinates of the external check. Should be selected at least six evenly spaced points on the coordinate transformatio

16、n coincides accuracy check.(5) Coordinates of the midpoint of the database conversion model parameter calculation of regional selectionXian coordinate system for the 1980 database, using national data of a set of model parameters to meet the 1:5 million and 1:25 million scale database conversion acc

17、uracy; with the national data of the model parameters of the six regional meets 1 : 10 000 scale database conversion accuracy. For the 1954 Beijing coordinates database conversion, using the national data of the model parameters of the six regional meets, and 1:25 million, 1:5 million scale database

18、 conversion accuracy; by (2 3 ) to Calculation of model parameters to meet the 1:1 million scale database conversion accuracy.3.1:2.5-1:25 Million conversion of the database(1)Basic scale topographic maps by country Framing organizations databaseBasic scale topographic maps by country sub-site organ

19、izations graphics data (DLG,DEM,DRG),based on the following program to convert.1.1:2.5-1:10million DLG conversion of the database(2)1954 Beijing coordinate system1:2.5-1:10 million DLG conversion of the databaseA,according to the appropriate regional scale sub-division of lots, two steps complete th

20、e coordinate transformation. First to ellipsoid transform, re-scale maps using the corresponding region of X, Y coordinates of the coordinate shift amount of shift;B,according to 2000 National Geodetic coordinates corresponding to the scale of the standard profile data and Drawing cutting edge of th

21、e region maps the data in the blank area adjacent maps use additional data;C,add the 2000 National Geodetic coordinates in grid square layer, delete the original square grid where the data layer;D,complete the chart profile changes, data editing, data access side, topology reconstruction, data stora

22、ge and other data processing and construction of library work;E,with maps for Edge: The picture on the right (1954 Beijing coordinate system) then left (China Geodetic Coordinate System ), the first picture on the right of the ellipsoid to bring change and change in the use of the left with left of

23、motion for the coordinates of picture on the right translation, completed and saved then in the left side with the picture on the right (back up) results. Back to picture on the right to withdraw for Edge to join the pan with the amount, and the projection transformation, and finally use the right a

24、mount of completion of the translation with their own translation before they are allowed access to its adjacent picture on the right side;F,on the basis of geographic information database metadata associated changes entries.(2)1980 Xian coordinates 1:2.5-1:10 million DLG Database ConversionFraming

25、according to the relevant regional division of scale, without regard to ellipsoid transform, directly corresponding to the scale regional maps X, Y coordinates of displacement is to coordinate translation; and then follow the 1954 Beijing DLG database coordinate system transformation b f the corresp

26、onding steps.2,1:2.5-1:10 million DRG Database ConversionThe original data 300 500dpi scan of original printed maps to correct generated by the RGB raster data, no maps between the elements of Edge Treatment.(1) 1954 Beijing coordinates 1:2.5-1:10 million DRG Database Conversiona、A,consider the elli

27、psoid transformation and the corresponding map contour corner of the X, Y coordinate translation, calculation coordinate system in 1954, Beijing Drawing of profile corner in the China Geodetic Coordinate System coordinates, and modify the appropriate header files positioning coordinates;B,in the 200

28、0 National DRG data superimposed on the earth coordinate system based on the new geodetic control layer (Fig. profile and square in the grid, etc.), the new chart profile data or data gaps do not do a chart pattern for the region to complement and reduction;C,in the legend to add 2,000 National Geod

29、etic Coordinate System Control base note of new terms;D,the data layer was completed, and keep the original resolution of DRG data;E,change the metadata related to content, increase the standard of the 1954 Beijing Framing coordinates four corners of points in the plan profile China Geodetic Coordin

30、ate System coordinates, calculating in 2000 the national standard geodetic coordinate system profile corners framing the map coordinates of points.The converted data for China Geodetic Coordinate System coordinates, coordinates 1954 Beijing Framing.(2) 1980 Xian coordinates 1:2.5-1:10 million DRG Da

31、tabase ConversionGet maps corresponding contour map scale maps corner of the X, Y coordinate shift amount calculation under the shift maps positioning coordinates, modify the header file; and then follow the coordinates to the 1954 Beijing National Geodetic Coordinate System 2000 1:2.5 -1:10 million

32、 DRG database conversion b e steps.The converted data for China Geodetic Coordinate System coordinates, coordinates of Xian in 1980, Framing.3,1:2.5-1:10 million DEM Database ConversionThe original data of 25 meter resolution grayscale (256) raster data, library data, maps indirect edge processing i

33、ntact. This data conversion can be in two ways: one is based on the China Geodetic Coordinate System related to layer DLG data (contour lines, elevation points) to re-generate DEM (see DEM data production specifications), one is for DEM data conversion. The following are given DEM data conversion me

34、thods.(1) 1954 Beijing coordinates 1:2.5-1:10 million DEM Database ConversionA,in accordance with the scale corresponds to block maps, the need to add the contents of the adjacent side of the addition of a corresponding scale maps;B,consider the ellipsoid transformation and the corresponding scale m

35、aps of the X, Y coordinate translation volume, obtained by X, Y coordinates of corrections;C,the coordinate correction value maps coordinate translation, the same time, the starting coordinates of reference pixel resolution data to determine re-sampling;D,by 2000 the new national geodetic coordinate

36、 system and the overlapping pixel map contour maps crop, change the header file positioning coordinates;E,modify the meta data related to entry.(2) 1980 Xian coordinates 1:2.5-1:10 million DEM Database ConversionaA,in accordance with the scale corresponds to the corresponding block maps, the need to

37、 add the contents of the adjacent side of the addition of a corresponding scale maps;B,according to the corresponding scale maps of the X, Y coordinate translation capacity for maps coordinate translation and reference pixel resolution to determine the starting coordinates for data re-sampling;C,acc

38、ording to the 1954 Beijing coordinates 1:2.5-1:10 million DEM database conversion d, e steps.4,1:25 million DLG Database Conversion(1) 1:25 extreme increase of the plane coordinate shift amount is converted to the corresponding longitude and latitude, or direct access to the corresponding shift amou

39、nt of economic and maps, latitude shift amount;(2) The extreme amplitude by 1:25, latitude shift amount, latitude and longitude data to complete the 1:25 10 000 2000 National Geodetic latitude and longitude coordinate data conversion (1954 Beijing coordinate system taking into account the need to ch

40、ange and shift ellipsoid volume);(3) based on 2000 National Geodetic coordinates corresponding to the standard of 1:25 million data profile and Drawing cutting edge of the region maps the data in the blank area adjacent maps using data added;(4) data processing, including: graph profile changes, add

41、 new grid layer, data editing, data access side, topology reconstruction, data storage, etc.;(5) to change the metadata file.5,1:25 million DEM Database Conversion(1) the use of National Geodetic Coordinate System 2000 DLG data layers corresponding to re-interpolation generated DEM;(2) changes under

42、 the new DEM metadata file.2. Database established by other means1, the establishment of the graphics database by regionBy region (province, region, watershed, etc.) to establish the graphics database (DLG, DEM, DRG), can block the first sub-layer with the completion of conversion, refer to the abov

43、e basic geographic information database corresponding scale conversion program converted mosaic synthesis.1:10 10 000 -1:25 10 000 database, the database conversion program by 1:25 million conversion block by block, then the overall mosaic synthesis; by way of non-Gaussian projection organization, t

44、he original latitude and longitude data network 30 30 or 15 15 intersection as the coordinate conversion reference points to calculate the reference points in the China Geodetic Coordinate System coordinates graphics using GIS software to correct, complete data conversion.2, according to the linear

45、band graphic database establishedBy linear bands (state, river, lines, pipes lines, etc.) to establish the graphics database, can be based on the direction of bands, the length of such section were then spliced synthesis; also can strip ground points in a certain density The two sets of coordinates,

46、 point by point through the software to correct. Specific methods:block to correct: extreme blocks for 1:1, 1:1 million, according to data conversion, followed by side-by-block to correct synthesis; for extremely 1:5 block, according to 1:2.5-1:10 million to correct data conversion program block by

47、block Edge after synthesis; corrected point by point: According to data accuracy, the establishment of a certain density (1:1 million 100 MiG outlets, 1:5 million in 2000 MiG outlets) of the coordinate conversion reference points to calculate the reference points in the new coordinate system of coor

48、dinates, using GIS software for data conversion.3, no fixed points increase by the establishment of the graphics database partitionIncrease by no fixed points to establish the graphical data area, according to coordinates, scale and data subject where the maps, data, organization, product type (DLG,

49、 DEM, DRG) and so on, refer to the appropriate scale of the conversion program, the implementation of data conversion .4, DOM Database ConversionThe original data, air or space remote sensing for black and white or color image data, is continuous gray (full color) or RGB (color) raster data, resolution of